Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 172

JunosE 11.3.x Command Reference Guide N to Z
Mode
130
tunnelPassword—Password of up to 32 characters
servicePassword—Password of up to 32 characters
encryptionType—One of the following types:
0—Unencrypted password (the default)
8—Two-way encrypted password
passwordValue—Character string that specifies the password. The string can contain
any alphanumeric character, including spaces, up to 64 characters. Passwords are
case sensitive.
Domain Map Tunnel Configuration (for a tunnel password), IP Service Profile Configuration
(for a service profile password), Line Configuration (for a login password), Local User
Configuration (for a local user database password), Tunnel Group Tunnel Configuration
(for a tunnel group tunnel password)
Copyright © 2010, Juniper Networks, Inc.