Table of Contents
Advertisement
path trigger delay
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
For channelized OCx/STMx interfaces:
path pathChannel trigger delay msec delayTime
no path pathChannel trigger delay
For unchannelized OCx/STMx interfaces:
path trigger delay msec delayTime
no path trigger delay
Command introduced before JunosE Release 7.1.0.
Specifies the time duration that the router uses to determine when a SONET/SDH defect
at the path layer becomes an alarm. The no version restores the default setting, 2500
milliseconds.
pathChannel—Number, in the range 1–2147483648, that identifies the path on a
channelized interface
delayTime—Time, in the range 0–2500 milliseconds
Controller Configuration
Chapter 4: P Commands
183
Advertisement
Table of Contents
