JunosE 11.3.x Command Reference Guide N to Z
pppoe mtu
Syntax
Release Information
Description
Options
Mode
250
pppoe mtu { maximumMtu | use-lower-layer | use-mtu-tag }
no pppoe mtu
Command introduced in JunosE Release 7.1.0.
Enables you to control the deployment of larger packet sizes. The no version restores
the default behavior, which specifies a maximum MTU value.
maximumMtu—Maximum transfer unit parameter in bytes, in the range 66-65535 with
the default value 1494
use-lower-layer—Specifies use of the lower layer interface value minus any PPPoE
overhead
use-mtu-tag—Specifies use of the provided PPPoE mtu tag value
Interface Configuration, Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.