JunosE 11.3.x Command Reference Guide N to Z
set community
Syntax
Release Information
Description
Options
Mode
476
set community { list communityListName [ additive ] | none }
set community { communityNumber | knownCommunity | asCommunNumber }
[ communityNumber | knownCommunity | asCommunNumber ]* [ additive ]
no set community
Command introduced before JunosE Release 7.1.0.
Sets the BGP community attribute to one or more community numbers or a list of
community numbers. The no version removes the set clause from a route map.
communityListName—Name of a community; a string of up to 32 characters
additive—Adds the community number to the community list
none—Removes the community attribute
communityNumber—Number, in the range 1– 4294967295, that specifies the community
number
knownCommunity—Any of the following well-known communities; the Internet
community is not an option:
local-as—Prevents advertisement outside of the local AS
no-advertise—Prevents advertisement to any peer
no export—Prevents advertisement beyond the BGP confederation boundary
asCommunNumber—AS community number in the format AA:NN:
AA—Number, in the range 1–65535, that identifies an AS
NN—Number, in the range 1–65535, that uniquely identifies a community within an
AS
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.