Show Controllers Sonet Remote - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show controllers sonet remote

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show controllers sonet { interfaceSpecifier [ :controllerSpecifier ] remote [ all ] }
[ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about the statistics on the remote device when MDL is configured
on a T3 over channelized SONET interface or FDL is configured on either a T1 channel on
a T3 over channelized SONET interface or a T1 over SONET/SDH interface.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
controllerSpecifier—One of the following:
For a section or line, there is no controllerSpecifier
For a T3 over channelized SONET interface, specified in the format
pathChannel ds3-channel-number [ ds1-channel-number ]
[ subchannelNumber ]
For a T1 over SONET/SDH interface, specified in the format
pathChannel [ /pathPayload ] [ /tributaryGroup ] [ /tributaryNumber ]
[ /channelGroup ]
pathChannel—Number of the path
pathPayload—Number of the payload within the path. In SONET mode, pathPayload
is always 1. In SDH mode, pathPayload is the number of the TUG-3 group.
tributaryGroup—Number of the tributary group within the path. In SONET mode,
tributary group is the number of the VT group. In SDH mode, tributary group is the
number of the TUG-2 group.
tributaryNumber—Number of the tributary within the group. In SONET mode,
tributaryNumber is the number of the VT. In SDH mode, tributaryNumber is the
number of the TUG-1 group or tributary unit.
channelGroup—Number of the channel group
ds3-channel-number—Number of the ds3 channel
ds1-channel-number—Number of the ds1 channel in the range 1–28
subchannelNumber—Number of the subchannel in the range 1–24
all—Shows statistics for all time intervals, rather than statistics for selected time
intervals
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
643