Path Ds3 Shutdown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

path ds3 shutdown

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] path pathChannel ds3 ds3Channel shutdown
Command introduced before JunosE Release 7.1.0.
Disables a DS3 signal. This command applies to a DS3 over channelized SONET interface.
DS3 interfaces are enabled by default. The no version restarts a disabled interface.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the path
Controller Configuration
Chapter 4: P Commands
161