Neighbor Weight - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor weight

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
neighbor { ipAddress | ipv6Address | peerGroupName } weight value
no neighbor { ipAddress | ipv6Address | peerGroupName } weight [ value ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Assigns a weight to a neighbor connection. The no version removes a weight assignment.
All routes learned from this neighbor will have the assigned weight initially. The route
with the highest weight will be chosen as the preferred route when multiple routes are
available to a particular network.
The weights assigned with the match as-path and set weight route-map commands
override the weights assigned with the neighbor weight and neighbor filter-list
commands.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
value—Number in the range 0–65535; the weight to assign
Address Family Configuration, Router Configuration
Chapter 2: N Commands
69