Neighbor Maximum-Update-Size - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor maximum-update-size

Syntax
Release Information
Description
Options
Mode
46
neighbor { ipAddress | ipv6Address | peerGroupName } maximum-update-size value
no neighbor { ipAddress | ipv6Address | peerGroupName } maximum-update-size
[ value ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Sets the maximum size of update messages transmitted to a BGP peer. The no version
removes the maximum update size limitation.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of the BGP peer group. If you specify a BGP peer group by
using the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
value—Maximum update size in octets in the range 256–4096; default value is 1024
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.