Ppp Peer - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

Software for e series broadband services routers command reference n to z
Table of Contents

Advertisement

JunosE 11.3.x Command Reference Guide N to Z

ppp peer

Syntax
Release Information
Description
Options
Mode
236
[ no ] ppp peer { dns | wins }
Command introduced before JunosE Release 7.1.0.
Resolves conflicts when the router and the PPP peer router have the primary and
secondary DNS and WINS name server addresses configured with different values. If the
PPP peer router has the address and the router does not, the peer always supplies the
address regardless of how you have configured the PPP peer. The no version configures
the router to take precedence during setup negotiations between the router and the
remote personal computer client.
dns—Sets the peer to take precedence over the router for resolving conflicts in the
DNS primary and secondary addresses
wins—Sets the peer to take precedence over the router for resolving conflicts in the
WINS primary and secondary addresses
Interface Configuration, Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents