Table of Contents
Advertisement
neighbor local-as
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
neighbor { ipAddress | ipv6Address | peerGroupName } local-as number
no neighbor { ipAddress | ipv6Address | peerGroupName } local-as [ number ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Assigns a local AS number for the specified BGP peer or peer group. The no version
restores the default value set globally for the BGP instance with the router bgp command.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of the BGP peer group. If you specify a BGP peer group by
using the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
number—Number in the range 1–4294967295; the local AS to assign to the peer
Address Family Configuration, Router Configuration
Chapter 2: N Commands
43
Advertisement
Table of Contents
