Neighbor Passive - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor passive

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } passive
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Configures the BGP speaker so that it only accepts inbound connections from, but does
not initiate outbound connections to, the peer or peer group. The no version permits the
initiation of outbound connections. The default version removes the explicit configuration
from the peer or peer group and reestablishes inheritance of the feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
Router Configuration
Chapter 2: N Commands
49