Ospf Auto-Cost Reference-Bandwidth - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

ospf auto-cost reference-bandwidth

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ospf auto-cost reference-bandwidth refBw
Command introduced before JunosE Release 7.1.0.
Controls how OSPF calculates default metrics for the interface. The no version assigns
cost based only on the interface type.
refBw—Bandwidth in megabits per second, in the range 1–4294967; default value is
100
Router Configuration
Chapter 3: O Commands
115