Path Ds3 T1 Shutdown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

path ds3 t1 shutdown

Syntax
Release Information
Description
Options
Mode
174
[ no ] path pathChannel ds3 ds3Channel t1 t1Channel[/subchannel ] shutdown
Command introduced before JunosE Release 7.1.0.
Disables a T1 channel or subchannel on a DS3 signal. This command applies to a T1
channel or subchannel on a DS3 over channelized SONET interface. T1 channels are
enabled by default. The no version restarts a disabled interface.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
subchannel—Fractional T1 interface in the range 1–24
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.