Radius Trap Auth-Server-Not-Responding - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

radius trap auth-server-not-responding

Syntax
Release Information
Description
Options
Mode
348
radius trap auth-server-not-responding { enable | disable }
no radius trap auth-server-not-responding
Command introduced before JunosE Release 7.1.0.
Enables or disables SNMP traps when a RADIUS authentication server fails to respond
to a RADIUS Access-Request message. The no version restores the default, disable.
enable—Specifies the feature
disable—Disables the feature; this is the default setting
Global Configuration
Copyright © 2010, Juniper Networks, Inc.