Show L2Tp Received-Disconnect-Cause-Summary - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show l2tp received-disconnect-cause-summary

Syntax
Release Information
Description
Options
Mode
978
show l2tp received-disconnect-cause-summary [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays aggregate summary statistics for all information received by an LAC from an
LNS about the cause of an L2TP session disconnection. The LAC receives this information
from the LNS by means of a PPP Disconnect Cause Code attribute value pair (AVP)
included in an L2TP Call-Disconnect-Notify (CDN) message.
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.