Show Ip Bgp Neighbors Received-Routes - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ip bgp neighbors received-routes

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
l2vpn all | route-target signaling ]
neighbors { ipAddress | ipv6Address } received-routes
[ fields fieldOptions ] [ delta ] [ filter ]
Command introduced before JunosE Release 7.1.0.
l2vpn and all keywords added in JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays routes originating from the specified BGP neighbor before inbound policy is
applied.
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default
option
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN
routing and forwarding instance with the name vrfName
l2vpn—Displays information for only the L2VPN address family
all—Optional keyword; has no effect
route-target signaling—Displays information for only the route-target address family
ipAddress—IP address of a neighbor whose routes the router has learned
ipv6Address—IPv6 address of a neighbor whose routes the router has learned
fields—Displays only the specified fields; the display order of the fields is hard-coded
and not affected by the order in which you enter them
fieldOptions—Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities |
extended-communities | imported | intro | in-label | loc-pref | med | next-hop |
next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi | stale |
unknown-types | weight ]*
all—All available information; not recommended, because this information for each
network does not fit on a single line and is difficult to read
afi—Address family identifier
aggregator—AS number and IP address of aggregator
as-path—AS path through which this route bas been advertised
atomic-aggregate—Whether the atomic aggregate attribute is present
Chapter 7: S Commands
743