Set Qos-Bandwidth - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

set qos-bandwidth

Syntax
Release Information
Description
Options
Mode
508
set qos-bandwidth { bandwidthValue | adaptive }
no set qos-bandwidth
Command introduced in JunosE Release 7.1.0.
adaptive keyword added in JunosE Release 7.2.0.
Sets a multicast bandwidth for QoS adjustment or defines the bandwidth as adaptive
(automatically sensed). The no version removes the set clause from a route map.
bandwidthValue—Number, in the range 0–4294967259 kilobits per second, used for
QoS adjustment
adaptive—Defines the QoS bandwidth as being automatically sensed
Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.