Show Mpls L2Transport Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show mpls l2transport interface

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1016
show mpls l2transport interface
[ summary | [ interfaceType interfaceSpecifier ] [ brief | detail ] [ state not-up ] [ delta ]
]
[ filter ]
Command introduced before JunosE Release 7.1.0.
summary keyword added in JunosE Release 8.0.0.
Displays status and configuration information about layer 2 services over MPLS (also
known as Martini, or layer 2 transport) on the router or on specific interfaces.
summary—Displays summary information about layer 2 services over MPLS
interfaceType—Displays information only for the specified MPLS interface; if not
specified, information for all interfaces is displayed
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
brief—Displays limited interface information
detail—Provides expanded information about layer 2 services, rather than a summary
state not-up—Displays information only about interfaces that are not up
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
See Monitoring MPLS Layer 2 Interfaces for Layer 2 Services over MPLS in JunosE BGP
and MPLS Configuration Guide
Monitoring the Policy Configuration of Layer 2 Services over MPLS
Copyright © 2010, Juniper Networks, Inc.