Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 798

JunosE 11.3.x Command Reference Guide N to Z
756
as-path—AS path through which this route bas been advertised
atomic-aggregate—Whether the atomic aggregate attribute is present
best—Whether this is the best route for the prefix
clusters—List of cluster IDs through which the route has been advertised
communities—Community number associated with the route
extended-communities—Extended community
imported—Whether the route was imported
intro—Introductory information about the state of various BGP attributes; this
information is displayed only if you specify this keyword
in-label—MPLS label for the route; the label received with incoming MPLS frames;
typically, but not always, this is the label advertised to MP-BGP peers
loc-pref—Local preference for the route
med—Multiexit discriminator for the route
next-hop—IP address of the next router that is used when forwarding a packet to
the destination network
next-hop-cost—Whether the indirect next hop of the route is unreachable, if not,
displays IGP cost to the indirect next hop
origin—Origin of the route
originator-id—Router ID of the router in the local AS that originated the route
out-label—MPLS label for the route; the label sent with outgoing MPLS frames; also
the label received from MP-BGP peer; typically, but not always, this is the label
received from MP-BGP peers
peer—IP address of BGP peer from which route was learned
peer-type—Type of BGP peer: internal, external, or confederation
rd—Route distinguisher
safi—Subsequent address family identifier
stale—Route that has gone stale due to peer restart
unknown-types—Attribute codes for unknown path attributes
weight—Weight of the route
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
filter—See Filtering show Commands on page 4
Copyright © 2010, Juniper Networks, Inc.