Show Isis Topology - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show isis topology

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show isis topology [ [ level-1 | level-2 | l1 | l2 ]* [ nsap ]
[ level-1 | level-2 | l1 | l2 ]* ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the paths to all intermediate systems.
level-1—Displays paths to all level 1 routers in the area
level-2—Displays paths to all level 2 routers in the domain
l1—Displays paths to all level 1 routers in the area
l2—Displays paths to all level 2 routers in the domain
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
nsap—NSAP address
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
963