JunosE 11.3.x Command Reference Guide N to Z
no area
Syntax
Release Information
Description
Options
Mode
80
no area { areaId | areaIdInt }
Command introduced before JunosE Release 7.1.0.
Removes the specified OSPF area if there are no OSPF interfaces configured in the area.
This command has only a no version.
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
Router Configuration
Copyright © 2010, Juniper Networks, Inc.