Table of Contents
Advertisement
show ipsec tunnel
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ipsec tunnel [ tunnelName | [ virtual-router vrName ] ip ipAddress ]
[ state { adminState | operStatus } ] [ filter ] [ detail ] [ delta ]
To display summary information:
show ipsec tunnel summary [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about tunnels that are configured on a specific virtual router.
tunnelName—Name of tunnel
vrName—Name of virtual router on which tunnels are configured
ipAddress—IP address used by tunnels
state—Restricts display to tunnels in one of the following states:
adminState—Administrative state of enabled or disabled
operStatus—Operational state of up, down, lower-down, or not-present
filter—See Filtering show Commands on page 4
detail—Displays configuration and statistics of tunnels
delta—Displays baselined statistics
summary—Displays a summary of all tunnels configured on the router
Privileged Exec
Chapter 7: S Commands
897
Advertisement
Table of Contents
