Show Controllers T3 Remote - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show controllers t3 remote

Syntax
Release Information
Description
Options
Mode
646
show controllers t3 interfaceSpecifier remote [ all ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about the statistics on the remote device when MDL is configured
on a T3 interface or FDL is configured on a T1 channel.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
all—Shows statistics for all time intervals, rather than statistics for selected time
intervals
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.