Table of Contents
Advertisement
show controllers sonet
Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show controllers sonet { [ brief ] | interfaceSpecifier [ :controllerSpecifier ]
{ [ configuration ] | layerType [ interval | total [ delta ] ] |
controllerType [ interval ] | all [ total [ delta ] ] } } [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the statistics or the configuration for the different layers of channelized SONET
and SDH interfaces.
brief—Displays a summary of information about all controllers
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
controllerSpecifier—One of the following:
For a section or line, there is no controllerSpecifier
For a path, the number of the path
For a tributary, specified in the format
pathChannel [ /pathPayload ] [ /tributaryGroup ] [ /tributaryNumber ]
For an E1 or a DS1 controller, specified in the format
pathChannel [ /pathPayload ] [ /tributaryGroup ] [ /tributaryNumber ]
[ /channelGroup ]
For a DS3 controller, specified in the format
pathChannel ds3-channel-number [ ds1-channel-number ]
[ subchannelNumber ]
pathChannel—Number of the path
pathPayload—Number of the payload within the path. In SONET mode, pathPayload
is always 1. In SDH mode, pathPayload is the number of the TUG-3 group.
tributaryGroup—Number of the tributary group within the path. In SONET mode,
tributary group is the number of the VT group. In SDH mode, tributary group is the
number of the TUG-2 group.
tributaryNumber—Number of the tributary within the group. In SONET mode,
tributaryNumber is the number of the VT. In SDH mode, tributaryNumber is the
number of the TUG-1 group or tributary unit.
channelGroup—Number of the channel group
ds3-channel-number—Number of the ds3 channel
ds1-channel-number—Number of the ds1 channel in the range 1–28
subchannelNumber—Number of the subchannel in the range 1–24
Chapter 7: S Commands
641
Advertisement
Table of Contents
