Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 368

JunosE 11.3.x Command Reference Guide N to Z
326
l2cd-min-lp-data-rate-up—Excluded by default; includes RADIUS attribute 26-121,
Min-LP-Data-Rate-Up
l2cd-min-lp-data-rate-dn—Excluded by default; includes RADIUS attribute 26-122,
Min-LP-Data-Rate-Dn
l2cd-max-interlv-delay-up—Excluded by default; includes RADIUS attribute 26-123,
Max-Interlv-Delay-Up
l2cd-act-interlv-delay-up—Excluded by default; includes RADIUS attribute 26-124,
Act-Interlv-Delay-Up
l2cd-max-interlv-delay-dn—Excluded by default; includes RADIUS attribute 26-125,
Max-Interlv-Delay-Dn
l2cd-act-interlv-delay-dn—Excluded by default; includes RADIUS attribute 26-126,
Act-Interlv-Delay-Dn
l2cd-dsl-line-state—Excluded by default; includes RADIUS attribute 26-127,
DSL-Line-State
l2cd-dsl-type—Excluded by default; includes RADIUS attribute 26-128, DSL-Type
mlppp-bundle-name—Excluded by default; includes RADIUS attribute 26-62,
MLPPP-Bundle-Name
nas-port—Includes RADIUS attribute 5, NAS-Port
nas-port-id—Includes RADIUS attribute 87, NAS-Port-Id
nas-port-type—Includes RADIUS attribute 61, NAS-Port-Type
pppoe-description—Includes RADIUS attribute 26-24, Pppoe-Description
profile-service-description—Includes RADIUS attribute 26-53, Service-Description
tunnel-client-auth-id—Includes RADIUS attribute 90, Tunnel-Client-Auth-Id
tunnel-client-endpoint—Includes RADIUS attribute 66, Tunnel-Client-Endpoint
tunnel-interface-id—Excluded by default; includes RADIUS attribute 26-44,
Tunnel-Interface-ID
tunnel-medium-type—Includes RADIUS attribute 65, Tunnel-Medium-Type
tunnel-server-attributes—Excluded by default; includes all supported tunnel server
attributes; that is, the attributes of the tunnel client when PPP is terminated at the
LNS on the router
tunnel-server-auth-id—Includes RADIUS attribute 91, Tunnel-Server-Auth-Id
tunnel-server-endpoint—Includes RADIUS attribute 67, Tunnel-Server-Endpoint
Copyright © 2010, Juniper Networks, Inc.