Radius Override Nas-Info - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

radius override nas-info

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] radius override nas-info
Command introduced before JunosE Release 7.1.0.
Configures the RADIUS client for a virtual router context to override the standard use of
the NAS-IP-Address [4] and NAS-Identifier [32] attributes when the client performs AAA
broadcast accounting. Normally, AAA accounting packets include the NAS-IP-Address
and NAS-Identifier attributes of the virtual router that generates the accounting
information. However, this command specifies that the broadcast accounting packets
instead include the authenticating virtual router's NAS-IP-Address and NAS-Identifier
attributes. The no version restores the standard use of the two attributes in AAA
accounting information.
Global Configuration
Chapter 6: R Commands
335