Router Isis - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

router isis

Syntax
Release Information
Description
Options
Mode
408
[ no ] router isis [ tag ]
Command introduced before JunosE Release 7.1.0.
Enables the IS-IS routing protocol and specifies an IS-IS process for IP. The no version
disables IS-IS routing.
tag—Meaningful name for a routing process; name must be unique among all IP router
processes for a given router; if not specified, a null tag is assumed, and the process is
referenced with a null tag
Global Configuration
Copyright © 2010, Juniper Networks, Inc.