Send-More-Specific-Routes-Disable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

send-more-specific-routes-disable

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] send-more-specific-routes-disable
Command introduced before JunosE Release 7.1.0.
Specifies that RIP does not send a more-specific route if it has a less-specific route with
any metric. The no version restores the default condition, wherein RIP always sends a
more-specific route even if a less-specific route with a metric is available.
Address Family Configuration, Router Configuration
Chapter 7: S Commands
445