Table of Contents
Advertisement
show ip pim data-mdt
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ip pim data-mdt [ senders | receivers ] [ group groupIPAddress ]
[ source sourceIPAddress ] [ summary | count ]
Command introduced in JunosE Release 8.2.0.
Displays the configuration and status of a data MDT. There is no no version.
senders—Displays data MDTs on which the provider edge transmits data
receivers—Displays data MDTs on which the provider edge receives data
groupIPAddress—IP address of the group
sourceIPAddress—IP address of the source
summary—Displays a summary of configuration for each data MDT
count—Displays the number of data MDTs
Privileged Exec
Chapter 7: S Commands
843
Advertisement
Table of Contents
