Show Ipsec Certificates - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ipsec certificates

Syntax
Release Information
Description
Options
Mode
884
show ipsec certificates { all | crl | peer | public-certs | root-cas } [ hex-format ]
[ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the IKE certificates configured on the E Series router.
NOTE: This command is replacing the show ike certificates command. The
show ike certificates command may be removed completely in a future
release.
all—Displays all certificates configured on the router
crl—Displays certificate revocation lists
peer—Displays peer certificates
public-certs—Displays public certificates
root-cas—Displays root CA certificates
hex-format—Displays certificate data in hexadecimal format
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.