Neighbor Prefix-List - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor prefix-list

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list
prefixListName { in | out }
no neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list
[ prefixListName ] { in | out }
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Assigns an inbound or outbound prefix list. The no version removes the prefix list.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
prefixListName—Name of a BGP prefix list
in—Assigns prefix list to incoming routes (inbound policy)
out—Assigns prefix list to outgoing routes (outbound policy); you cannot configure a
member of a peer group to override the inherited peer group characteristic for outbound
policy
Address Family Configuration, Router Configuration
Chapter 2: N Commands
53