Show Ipsec Transport Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ipsec transport interface

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ipsec transport interface [ detail ] [ application applicationType ]
[ state { up | down } ] [ interfaceName |
[ virtual-router vrName ] destination destAddress | local localAddress ] [ filter ]
To display summary information:
show ipsec transport interface summary
Command introduced before JunosE Release 7.1.0.
Displays all details, including statistics, of IPSec transport connections that match the
specified criteria.
detail—Includes statistics for the displayed connection
applicationType—Application protected by IPSec transport connections
state—Displays connections that are in the specified state, up or down
interfaceName—Connection number that you want to display
vrName—Name of a virtual router. If you do not specify a virtual router, the router
displays connections on the current virtual router context. Notice that the local and
destination IP addresses exist in the current virtual router context.
destAddress—IP address of remote endpoint
localAddress—IP address of local endpoint
filter—See Filtering show Commands on page 4
summary—Displays a summary of all IPSec transport connections
Privileged Exec
Chapter 7: S Commands
895