Set As-Path Prepend - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

set as-path prepend

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
set as-path prepend { list listName | asPathNumber [ asPathNumber ]* }
no set as-path prepend
Command introduced before JunosE Release 7.1.0.
Prepends one or more AS numbers or a list of AS numbers to the AS path for BGP routes.
The no version removes the set clause from a route map.
listName—Name of a list of AS path numbers; string of up to 32 characters
asPathNumber—Number, in the range 1–65535, that appends the string following the
keyword prepend to the AS path of the route that is matched by the route map. Applies
to outbound BGP route maps.
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Route Map Configuration
Chapter 7: S Commands
473