Show Mpls Binding - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show mpls binding

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
For MPLS binding information:
show mpls { [ ip ] binding | binding ip }
[ destAddr [ maskLength | maskAddress ] [ longer-prefixes ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]
For layer 2 over MPLS binding information:
show mpls binding layer2-vc [ vc-type vcType [ vc-id vcId ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]
Command introduced before JunosE Release 7.1.0.
explicit-null-label keyword added in JunosE Release 7.2.0.
Displays label bindings from the MPLS label information base. This command displays
the same output as the show ldp binding command.
ip—Specifies optional keyword for compatibility with non–E Series implementations
when placed before the binding keyword; when present (either before or after this
keyword) displays label binding information only for IP prefixes
destAddr—Destination address for which you want information displayed; if not
specified, displays all destinations
maskLength—Prefix length for the destination address
maskAddress—Address mask to be applied to the destination address
longer-prefixes—Displays information for prefixes that are equal to or more specific
than the specified prefix
interface—Displays labels associated with the specified interface
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
ipAddress—Displays labels associated with the specified neighbor
generic—Displays only generic labels
atm—Displays only ATM VPI/VCI labels
Chapter 7: S Commands
1009