Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 57

Copyright © 2010, Juniper Networks, Inc.
Table 4: Interface Types and Specifiers for E120 Router and E320
Router (continued)
Interface Type Description
mplsL2shim MPLS shim
interface
mplsMajor MPLS major
interface
mplsMinor MPLS minor
interface
Chapter 1: Command Reference Topics
Interface Specifier
slot/adapter/port[.subinterface ]
slot—Number of the chassis slot in the range
0–5 (E120 router) and 0–5 or 11–16 (E320
router)
adapter—Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed in the
right IOA bay (E120 router) or the upper IOA
bay (E320 router).
1 indicates that the IOA is installed in the
left IOA bay (E120 router) or the lower IOA
bay (E320 router).
port—Port number on the IOA
subinterface—Number of the subinterface in
the range 1–2147483647
slot/adapter/port[.subinterface ]
slot—Number of the chassis slot in the range
0–5 (E120 router) and 0–5 or 11–16 (E320
router)
adapter—Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed in the
right IOA bay (E120 router) or the upper IOA
bay (E320 router).
1 indicates that the IOA is installed in the
left IOA bay (E120 router) or the lower IOA
bay (E320 router).
port—Port number on the IOA
subinterface—Number of the subinterface in
the range 1–2147483647
[ vr:]tunnel-name
vr—Name of a virtual router
tunnel-name—Name of the tunnel
Example
mplsL2shim 3/0/2.1
mplsMajor 3/0/2.1
mplsMinor
lsp-02020202-1-4
15