JunosE 11.3.x Command Reference Guide N to Z
reference-bandwidth
Syntax
Release Information
Description
Options
Mode
378
reference-bandwidth refBandwidth
no reference-bandwidth
Command introduced in JunosE Release 8.0.0.
Configures a reference bandwidth on which the default routing metric for an IS-IS interface
is based in the absence of a configured metric. The default metric is calculated as the
reference bandwidth divided by the interface's bandwidth. The no version removes the
reference bandwidth.
refBandwidth—Number of bits per second, in the range 1000–1000000000000
Router Configuration
Copyright © 2010, Juniper Networks, Inc.