Set Ip Source-Prefix - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

set ip source-prefix

Syntax
Release Information
Description
Options
Mode
498
[ no ] set ip source-prefix ipAddress ipMask { deny | primary }
Command introduced before JunosE Release 7.1.0.
Specifies a source address range that will be inserted into a specific interface and the
action to take with the range. The no version removes the source address range from the
route map.
ipAddress—IP address for the range
ipMask—IP address mask for the range
deny—Drops the addresses that appear in the source address range
primary—Associates the source prefix with the primary IP interface
Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.