Radius Override Calling-Station-Id Remote-Circuit-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

radius override calling-station-id remote-circuit-id

Syntax
Release Information
Description
Mode
334
radius override calling-station-id remote-circuit-id
no radius override calling-station-id
Command introduced before JunosE Release 7.1.0.
Configures RADIUS to override the standard use of the Calling-Station-Id [31] RADIUS
attribute and instead use the PPPoE remote circuit ID transmitted from a DSLAM device.
The no version restores the default Calling-Station-Id value, which is the telephone
number from which the call originated.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.