Show Ip Bgp Neighbors Paths - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ip bgp neighbors paths

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ip bgp
[ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
route-target signaling ] neighbors { ipAddress | ipv6Address } paths [ regularExpression
] [ filter ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays path information for the specified BGP neighbor.
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default
option
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN
routing and forwarding instance with the name vrfName
route-target signaling—Displays information for only the route-target address family
ipAddress—IP address of a neighbor whose routes the router has learned
ipv6Address—IPv6 address of a neighbor whose routes the router has learned
regularExpression—Regular expression to match the AS path. See show ip bgp regexp
for information about regular expressions.
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
741