Service Ctrl-X-Reboot - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

service ctrl-x-reboot

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] service ctrl-x-reboot
Command introduced before JunosE Release 7.1.0.
Enables the Ctrl+x key combination to reboot the router at all times, except that the key
combination has no effect if you are accessing the router through a Telnet session. The
no version restores the default condition, disabled.
Global Configuration
Chapter 7: S Commands
453