Profile Vlan Override Bulk-Config - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

profile vlan override bulk-config

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
To configure an override for a single-tagged VLAN ID:
profile vlan override bulk-config bulkConfigName vlan vlanIdValue overrideProfileName
To configure an override for a double-tagged S-VLAN ID:
profile vlan override bulk-config bulkConfigName svlan s-vlanIdValue
{ vlanIdValue | any } overrideProfileName
To remove the profile override assignment:
no profile vlan override bulk-config bulkConfigName { svlan s-vlanId | vlan }
{ vlanId | any }
Command introduced in JunosE Release 7.1.0.
bulk-config keyword and bulkConfigName variable added in JunosE Release 7.3.0.
Assigns an overriding profile to a single-tagged VLAN ID or double-tagged S-VLAN ID
that exists within a VLAN subrange previously configured with the vlan bulk-config
command. The profile vlan override bulk-config command enables you to assign a
special profile for the subscribers associated with a specific DSLAM. After the overriding
profile is assigned, it is used instead of the previously assigned base profile to create any
VLAN dynamic subinterface columns over the specified VLAN ID or double-tagged S-VLAN
ID. The no version removes the overriding profile assignment for the VLAN ID or
double-tagged S-VLAN ID and restores the original base profile assignment.
bulkConfigName—Name of the VLAN range; string of up to 80 characters
s-vlanIdValue—S-VLAN ID number, in the range 0–4095
vlanIdValue—VLAN ID number, in the range 0–4095
overrideProfileName—Name of the profile for which you want to assign an override
any—Specifies the VLAN ID as a wildcard
Interface Configuration
Chapter 4: P Commands
279