Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
path overhead c2
Syntax
Release Information
Description
Options
Mode
178
For channelized OCx/STMx interfaces:
[ no ] path pathChannel overhead c2 byteValue
For unchannelized OCx/STMx interfaces:
[ no ] path overhead c2 byteValue
Command introduced before JunosE Release 7.1.0.
Overrides the default value of the path signal label (C2) byte for SONET and SDH
interfaces. The no version restores the default setting, which depends on the types of
interface layers configured above the SONET/SDH interface.
pathChannel—Number, in the range 1–2147483648, that identifies the path on a
channelized interface
byteValue—Value for C2 byte; integer, in the range 0–255
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
