Table of Contents
Advertisement
ntp broadcast
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ntp broadcast [ version number ] [ pollInterval ]
Command introduced before JunosE Release 7.1.0.
Enables NTP broadcast server on a server interface to transmit NTP broadcast packets
periodically. You can enable up to 100 NTP broadcast server interfaces. The no version
prevents the interface from sending NTP broadcast packets.
number—Integer in the range 1–4; indicates the version of the NTP software on the
NTP broadcast server; default value is 3
pollInterval—Integer in the range 4–17; specifies the poll interval in seconds (as a
power of 2) for broadcasting NTP messages; default value is 6 (64 seconds)
Interface Configuration
Chapter 2: N Commands
97
Advertisement
Table of Contents
