JunosE 11.3.x Command Reference Guide N to Z
neighbor graceful-restart stalepaths-time
Syntax
Release Information
Description
Options
Mode
40
neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
stalepaths-time seconds
no neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
stalepaths-time [ seconds ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
For a peer or peer group, sets the time period after a peer session restart during which
BGP waits for an End-of-RIB marker from the peer before flushing all stale routes from
that peer. The period is measured from when the session is detected in a down state.
The no version restores the default value, 360 seconds.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
seconds—Integer in the range 1–3600; default value is 360 seconds
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.