receive version
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] receive version [ 1 ] [ 2 ] [ off ]
Command introduced before JunosE Release 7.1.0.
Restricts the RIP version that the router can receive on a RIP remote-neighbor interface.
The no version sets the remote-neighbor interface back to the default value, receiving
both RIP version 1 and version 2.
1—Specifies RIP version 1 only
2—Specifies RIP version 2 only
off—Turns reception off
Remote Neighbor Configuration
Chapter 6: R Commands
363