Table of Contents
Advertisement
show hdlc interface
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show hdlc interface [ { dataRestriction [ dataRestriction ]* } | full ]
[ delta ] [ stateRestriction ] [ { interfaceType } interfaceSpecifier ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays statistics about specified Cisco HDLC interfaces.
dataRestriction—Specify one or more of the following keywords:
config—Displays information about the HDLC interface configuration
status—Displays information about the HDLC interface operational status
statistics—Displays information about the HDLC interface statistics
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
full—Displays configuration, status, and statistics information; equivalent to specifying
config status statistics
delta—Displays baselined statistics
stateRestriction—Specify only one of the following keywords:
open—Displays an interface that is administratively enabled, which means that the
no ppp shutdown command is operational
closed—Displays an interface that is administratively disabled, which means that
the ppp shutdown command is operational
up—Displays an interface that is up, which means that the LCP has been negotiated
down—Displays an interface that is down, which means that the LCP has not been
negotiated, the negotiations have failed, or the connection has been terminated
lower-layer-down—Displays an interface that is not up and is waiting for the lower
layer to come up to initiate negotiations for LCP
not present—Displays an interface on which traffic cannot flow because hardware
is unavailable
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
695
Advertisement
Table of Contents
