JunosE 11.3.x Command Reference Guide N to Z
pppoe max-session-vsa
Syntax
Release Information
Description
Mode
248
pppoe max-session-vsa { override | ignore }
no pppoe max-session-vsa override
Command introduced in JunosE Release 9.3.0.
Configures the PPPoE application to override the current PPPoE maximum session value
set with the pppoe sessions command with the PPPoE maximum session value returned
by the RADIUS server in the Max-Clients-Per-Interface VSA [26-143] in Access-Accept
messages. The no version restores the default behavior, which ignores the PPPoE
maximum session value returned by RADIUS.
NOTE: The router never overrides the maximum number of PPPoE
subinterfaces supported per line module with a value from RADIUS that is
either 0 (zero) or greater than the maximum number of supported PPPoE
subinterfaces. See JunosE Release Notes, Appendix A, System Maximums
corresponding to your software release for information about the maximum
number of PPPoE subinterfaces supported for each line module.
Interface Configuration, Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.