Protocol Priority - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

protocol priority

Syntax
Release Information
Description
Options
Mode
282
protocol protocolValue priority priorityValue
no protocol protocolValue priority
Command introduced in JunosE Release 8.1.0.
Sets the priority of the protocol. The no version sets the priority value to the priority value
specified in the associated preconfigured group.
protocolValue—Name of the protocol
priorityValue—dataPath, Hi-Green, Hi-Yellow, Lo-Green, Lo-Yellow
DoS Protection Group Configuration
Copyright © 2010, Juniper Networks, Inc.