Node - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

node

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] { typeOfInterface | set | superset } node [ group trafficClassGroup | scheduler-profile
schedulerProfileName ]*
Command introduced before JunosE Release 7.1.0.
svlan keyword added in JunosE Release 7.1.0.
set and superset keywords added in JunosE Release 9.2.0.
Specifies that a scheduler node be configured for each interface of the given interface
type. The no version removes this rule from the QoS profile.
typeOfInterface—Interface types for scheduler nodes to be configured: atm, atm-vc,
atm-vp, bridge, ethernet, fr-vc, ip, ip-tunnel, ipv6, l2tp-session, l2tp-tunnel, lsp, serial,
server-port, svlan, vlan
set—Configures the node for an interface set
superset—Configures the node for an interface superset
trafficClassGroup—Name of the traffic class group
schedulerProfileName—Name of the scheduler profile
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
QoS Profile Configuration
Configuring a QoS Profile
Configuring Shadow Nodes
Configuring a Basic Parameter Definition for QoS Administrators
Attaching a QoS Profile to an Interface Superset or an Interface Set
Chapter 2: N Commands
89