Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
protocol burst
Syntax
Release Information
Description
Options
Mode
280
protocol protocolValue burst burstSize
no protocol protocolValue burst
Command introduced in JunosE Release 8.1.0.
Sets the burst size for the protocol. The no version sets the value to the default packet
value, which is equal to half of the configured maximum rate.
protocolValue—Name of the protocol
burstSize—Number of packets, in the range 32–65535; default value is one half the
maximum rate
DoS Protection Group Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
